Freeze Dryer (Lyophilizer)
Lyophilization technology is used in fields such as food engineering, pharmacology, biochemistry, tissue engineering and microbiology to freeze a substance and then remove moisture from the environment by allowing water to pass directly into the gaseous state.
Triple Quadrupole GC-MS/MS Analysis
Gas Chromatography-Mass Spectrometry is a device used for structure analysis and substance quantification.
High Speed Refrigerated Centrifuge
High Speed Refrigerated Centrifuge is used for solid-liquid separation of various biological, chemical, microbial samples.
DNA Isolation and Analysis
The DNA Isolation and Pipetting System offers two different technologies in one device. After performing precise DNA isolation, it automatically performs the purification process using the pipetting system.
Electrophoresis Imaging Device
The Electrophoresis Imager is used for the separation and analysis of charged molecules (nucleic acids stained with fluorophores) in a liquid or solid medium.
Bioprocessing Operations
It can produce the desired product or active ingredients of this product with bioreactors of different volumes and perform the scaling-up process to reduce the margin of error in industrial production.
Liquid-Solid Extraction Unit
With the Liquid-Solid Extraction Unit, one, some or almost all of the substances in the solid material are extracted with a suitable solvent liquid.
Rotary Evaporator
The rotary evaporator lowers the boiling point of solutions, allowing them to evaporate at lower temperatures than they should, separating the solvents in the sample or the solids in the solvent.
Cold Pressing Oil Machine
The Cold Press Oil Machine allows oil-containing substances, such as the fruit, seed, or kernel of a plant, to be pressed and filtered to extract oil without the use of heat or chemical solvents.
Liquid Product Filling Machine
Liquid Product Filling Machine is a packaging machine that allows filling fluid products into ready-made packages, buckets, bottles or containers in 99% equal amounts. The biggest difference from its counterparts is that it can also fill products with high viscosity.
3D Bioprinting System
The 3D next-generation bioprinter from Turkey allows for multi-stage bioprinting and its design enables it to work with fragile and easily contaminated materials and is used for bioprinting complex/detailed 3D models.
Biosafety Cabinet Level II
A biosafety cabinet is an enclosed, ventilated laboratory workspace for working safely with materials contaminated (or potentially contaminated) with pathogens that require a certain level of biosafety.
Autoclave
Autoclave devices are used to study how various substances react under high temperature and pressure.
Light Microscope
Light microscopes are often used in laboratories to magnify the image about 400 times. In these microscopes, visible light is refracted through the lenses, allowing the observer to see the specimen.
Homogenizer
It is a homogenizer with digital speed display for volumes from 0.25 to 30 L (H2O). A wide range of speeds from 600 to 10,000 rpm allows high circular speeds even with small diameter rotors.
STELLARIS Digital Light Sheet Microscope (DLS)
The imaging system combines confocal and digital light-sheet (DLS) microscopy in a single location, enabling images of unparalleled quality to be taken according to experimental needs without hardware modification.
Ash Oven
The muffle furnace allows the analysis of ash or residues left over from burning materials at high temperatures.
Water Activity Meter
Water activity, which determines the ability to react to water and is a measure of the amount of free water, indicates how tightly water is structurally and chemically bound.
Please fill in the forms below so that your analysis request can be forwarded to us.